Jabra Engage 65/ Engage 75: The Meaning Of Lights

The Jabra Engage 65 and Engage 75 have lights and indicators to show you what is going on with your headset. Here is what they all mean:

Lights on the Base:

• Green Handset: Turns the headset on while in phone mode (does the same thing as the on/off button on the headset itself)
• Red Handset: Turns the headset off in phone mode (again, the on/off button on the headset does the same thing)
• Connection Indicators: (In Picture 1 above, to the left under the green handset light) They indicate what devices you currently have connected. In the picture, a connection to a desk phone and a cell phone is shown
• Battery indicator: In Picture 1, this is located to the right of the time. The battery bars will turn off as your battery life dies down, just like a cell phone battery indicator
• Menu button: Located directly under the time. Press once to open the menu. Once in the menu, press it again to navigate down; hold the menu button to navigate up
• + and - buttons: (Shown in Picture 2) Once in the menu, use these buttons to navigate from side to side within the menu. When in a volume setting, use these to move volume up and down
• Check button: Press to confirm a selection
• Back button: Located to the right of the menu button in Photo 2, use this to go back a step in the settings

Lights on the Headset:

• Orange Pulsing: Headset on the charger and charging
• Solid Green: Headset is on charger and fully charged
• Solid Red: Headset turned on in phone mode, also will light up microphone tip. Doubles as a busy light!
• Flashing Blue: Headset is in pairing mode

Thinking about enhancing your headset experience? Check out our selection of wireless DECT headsets, featuring choices from Leitner headsets, Jabra headsets, Sennheiser headsets, and Plantronics headsets.