Yealink EHS 40 Setup - Sennheiser

What is in the box:

(You will only need the items highlighted below for the Sennheiser set-up)

• Yealink adapter box that has a USB cord coming out of it
• 1 Sennheiser Y-cord ( has 1 RJ45 on one end and 2 cords (RJ45/RJ9) on the other
• 1 Plantronics Y-cord (has RJ45/3.5mm on one end and 2 cords (RJ45/RJ9) on the other
• 1 Jabra Y-cord (has RJ45/RJ9 on each end)

1. Connect the bottom of the y-cord into the green phone port in the back of the cube
2. Connect RJ45 and RJ9 end of the y-cord into the 2 available slots in the Yealink adapter box
3. Plug the USB cord coming out of the adapter box into the USB port in the phone
4. Set compat to A and move dipswitch #1 down in the back of the cube

You should be all set! If you need any further assistance, please give us a call at 1-800-432-3738 and we'll be happy to help!