Leitner TS Steps Before Replacing for No Flash During Resync (LH200/300 series)

Updated by Kyle Newgent on Feb 10, 2023

  1. Unplugged reset
    1. Puffy battery can be removed - Replace the battery
    2. Puffy battery that can't be removed - Replace the mic
    3. Non-puffy battery, move on to step 2
  2. Reseat the battery, holding it in to ensure it establishes a connection
  3. Put battery door back on, making sure it flashes
  4. If no flashing then, and you can't get it to flash during a resync, replace the microphone

What is Headset Answers?

This is the internal support database for Headsets.com. We market office headsets in North America. With over 25 years experience in the business, we know headsets.

Please use our support database for free headset support, whether you’re a Customers of ours or not. If you have problems, suggestions, or unanswered questions please email us at hello@headsets.com (compliments and gratitude also welcomed)

What is Headset Answers?

This is the internal support database for Headsets.com. We market office headsets in North America. With over 25 years experience in the business, we know headsets.

Please use our support database for free headset support, whether you’re a Customers of ours or not. If you have problems, suggestions, or unanswered questions please email us at hello@headsets.com (compliments and gratitude also welcomed)

Questions/comments?