Leitner LH500/600 Series Wireless Headset Pairing

Our Leitner LH500/600 series headsets have a new way of pairing to the base. Check out how right here!

Automatic Pairing

1. Set the headset into the charging base
2. The FocusLight on the headset and base will both flash purple during registration
3. Once the headset light goes out and the base turns blue, they should be paired up and ready to go

Resync

1. Remove headset from the base and turn the headset off
2. Set the base to phone mode
3. Press and hold the ON/OFF button on the headset for about 5 seconds until the FocusLight flashes blue once, then let go. (The headset FocusLight will start flashing purple)
4. Press and hold the phone button on the base for about 5 seconds until it flashes, then let go. (The base and FocusLight will continue to flash purple)