Executive Pro Amp Setup

We can use a Leitner or Executive Pro corded headset when connecting into an Executive Pro Amp. For Leitner headsets, we'll need the Easy Connect Bundle.

How to Set It Up

1. Unplug the curly cord from the base of the telephone and plug that end into the back of the amp where you see the handset icon.
2. Plug the TEL cord (phone cord that came with the amp) into the back of the amp where it says TEL and plug the other end into the other end into the handset jack of the phone (where we disconnected the curly cord from).
3. Plug your headset into the jack on the side of the amp with the headset icon.
4. Make sure the batteries are in right OR the DCA is plugged in (never have both going at the same time).
5. Initially, compatibility switch should be set to 1 and A but may need to be adjusted.

How to Use It:

• To make or take a call make sure the headset button on the Amp is pressed down.
• Next take the handset off the cradle to answer an incoming or place an outgoing call.

Note: The Executive Pro Amp does not include a power cable (it does include batteries). However, you can order a power cable on our website at this link!

Still need amp help? Give us a call at 1-800-432-3738!