Pairing a Leitner Premium Lite to a Premium Plus Base and Vice Versa

You can pair a Leitner Premium Lite headset with a Premium Plus base and vice versa. The instructions are the same.

If you prefer video instructions you can see How to Pair 2 Headsets to a Leitner Premium Lite Base Here and How to Pair 2 Headsets to a Leitner Premium Plus Base Here

1. Remove both headsets from their bases and make sure both headsets are turned off (You should not see a light on the headset. If you do, the headset is still on)
2. Flip the primary base over so that you are looking at the bottom. Press and hold the volume up (+) button until the TEL light on the top of the base begins to flash, then let go
3. On the secondary headset, press and hold the ON/OFF button until it begins to flash, then let go
4. Set the secondary headset next to the primary base, and once everything stops flashing you should be all set
5. Turn on both headsets and start training :)

Now you can answer the phone either using the primary or secondary headset! When you want to end the pairing, just resync your Leitner Premium Lite back to its own base! If the Premium Plus is paired to the Premium Lite base, set it back on its original base for 30 seconds to auto-pair.