Resync for the Leitner Premium Dongle Headsets

The headset and dongle come already paired. If you need to install a new headset or do troubleshooting, here is how to pair or re-pair a headset to the dongle:

1. Ensure the headset is unplugged from the charging cord.
2. Insert the dongle into your device’s USB port.
3. Press and hold the button on the dongle until the light on the dongle begins to flash, then let go.

   

4. Press and hold the ON/OFF button on the headset for about 8 seconds until the FocusLight double-flashes blue, then let go.
5. The headset will then flash purple 5 times and the dongle will continue to flash. Once both stop flashing, pairing is complete!

To test the headset, click on the ON/OFF button. If paired, the FocusLight will turn blue and the light on the dongle will be solid white. If you press the button on the headset again, both the lights (headset and dongle) will go out.

If you want to know how to use the headset, check out our article on how to use the LH470/475!